Introduction to Implanova® Prosthetic System

a) The entire Implanova® prosthetic system uses the exact same screw type. The length of the screw head varies depending on the indication. All final abutment/restorations must be torqued to 20Ncm using an Implanova® prosthetic torque wrench. Please note that for the final restoration, the screw/abutment must be re-torqued to 20Ncm at least 10mins after the initial torqueing. If any preparations is made on the final abutment/restoration the screw/abutment must be torqued again. A single ISO hex driver is used for all prosthetic parts.

b) All Implanova® abutments utilize the conical, 11° tapered body design to ensure tight, uniform sealing with the internal surfaces of the implant. The abutment can be placed either at the time of surgical placement of the implant fixture if initial stability is sufficient or at a later date after the implant is integrated. As an alternative, a healing cap can be placed at the time of implant placement and can be replaced with the appropriate abutment after implant integration.

c) All Implanova® abutment components are made up of Grade 23 Titanium alloy (Ti-6Al-4V ELI) per ASTM F136.

d) Implanova medium height abutments are typically suitable for bone-level placed implants. Short abutments are for crestal placed implants.

e) Implanova abutments that are designated as unibutments are those that do not have any platform on themselves and the emergence profile is created by the restoration.

f) Implanova® abutments come in seven forms. Straight abutments come in solid, one-piece or two-piece Contoured Shoulder abutments. Solid abutments have an integrated external thread that is designed to be directly fastened into the Implanova® implant fixture without the need of an additional screw. All Implanova® Angled unibutments and Contoured Shoulder abutments attach to the Implanova® bone level implant fixture using a single size, universal abutment screw. All Implanova® abutments are compatible with and fit all Implanova® implant sizes.

Note: Angled abutments should not be used with 3mm implants. This includes TiTACH abutments and angled FRIDGE® unibutments.

Contoured Shoulder Abutments

Contoured Shoulder Abutments are two-piece abutments that offer anatomically contoured shoulder to provide esthetic bone-level buccal margin while allowing supra-crestal inter proximal margins and lingual crestal margins.

These abutments allows an apical preparation of the shoulder using a carbide bur or diamond abrasive.

Contoured Shoulder abutments are ideal for single unit restorations with or without adjacent natural teeth. They are also suitable for the “screwmentation” technique. They can also be used on the implant model for laboratory manufacturing of crowns.

Implanova Contoured Shoulder Abutments Dimensions